Osmio HT+ Dental and Lab Direct Flow RO Reverse Osmosis System
The Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System is a clean and modern, leading technology Direct Flow (No tank) reverse osmosis system that will ensure your decon room operation is more sanitary, water is on demand, and much easier maintenance. A major benefit of Direct Flow Reverse Osmosis versus conventional tank-based reverse osmosis, is the huge level of water saved by Direct Flow, not to mention there is no need to sanitise the tank. Bacteria build up of tanks is a primary reason why many dental surgeries end up getting poor membrane performance, due to bacteria build up and membrane fouling, and end up using more DI resin as this is doing more heavy lifting because of poor membrane performance.
The Osmio HT+ Dental & Lab Direct Flow Reverse Osmosis System uses 400 GPD Direct Flow Reverse Osmosis Membrane to provide a freshly purified on demand flow (approximately 1LPM at 3 bar incoming pressure).
✓ Ideal for autoclaves / sterilisers. Remove up to 99.99% of impurities from UK mains water.
✓ Under the counter commercial system that generates Deionised Water.
✓ Total of 5 filters, hygienically packaged. Meets HTM requirements and can deliver 0-3ppm, which is distilled quality.
✓ Smart Water - Analyzes water, tracks filter lifetime and optimizes system performance.
✓ Saves over 30,000 litres per year of water, a huge saving for any Dental Practice, Laboratory or School.
✓ Small footprint / Easy installation, standing model - no mounting to walls required.
✓ 6 month filter lifetime (first four filters) / deionised filter lifetime variable
✓ Full, courteous support provided by experienced professionals.
The perfect solution for Dental Practices - comes complete tap and fitting kit
Please download the manual from the files section below prior to purchase, as this is not included as a printed version in the box with the system. We highly recommend that you ask your plumber/installer to get in touch before installing the system if they are not familiar with installing reverse osmosis systems.
- System Dimensions 48cm Height x 36cm Width x 24cm Depth
- System Weight: 12 KG
- System Capacity: 60 Litres / Hour @ 3 Bar
- Incoming TDS: 600 PPM Max.
- Incoming Temperature: 10 - 30 °C
- Incoming Pressure: 2 Bar Min. 6 Bar Max.