Durr Dental 300 VS/VSA Yellow Inline Filter
- To be removed and cleaned Daily
This is the new version from Durr Dental. The previous version as pictured with 'discontinued' written across it is no longer available. Unfortunately the new version is not a straight swap from the old version as the diameter to connect to the hose is different.
In order to fit the new yellow filter you will also need the correct hose connector either 0700-820-30E which is a straight 30mm connector or alternatively 0700-800-04 which is a 90 degree elbow 30mm connector.
If the old hose has a hose clip or a cable tie you will need to remove these in order to remove the old hose connector and install the new one. Tip: turn the connector clockwise to remove it and also to install the new connector. If the hose has gone hard and brittle you will also need a replacement hose part number 9000-317-27.
If you need the fittings to adapt to the new filter please select the relevant variant either 'Straight Connecter Kit' or 'Elbow Connector Kit' and we will also supply the connector and a hose clip / cable tie to secure it.
We would also advise that you purchase some silicone grease to lubricate the O Rings on the filter. If you do not do this the O Rings will perish / break much quicker and may no longer create a seal.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.